Features: Sizes range from 1/16” to 2” | 2 MM THROUGH 50 MM
Ham-let tube fitting is a mechanism used both to seal and to grip tubing. The mechanical advantage and geometry of this kind of fitting produces a leak-tight assembly .
Ham-let tube fittings have been carefully manufactured to withstand the persistent demands for high-performance fluid system.
Features: Sizes range from 1/16” to 2”
Fittings are properly packaged with the exposed threads protected to ensure they are not damaged during delivery
All pipe threads meet the requirements of ASME/ANSI B1.20.1 (1983) for tapered pipe threads (NPT)
Working pressures are calculated in accordance with Power Piping Code ANSI B 31.1, Refiner Piping Code ASME/ANSI B 31.3 and section VIII of ASME Boiler & Pressure Vessel Code
Features: Sizes range from 1/4” to 1”
The HAM-LET ‘’UH’’ Series is designed for ultra-vacuum systems. Following are some of its special features:
Finger-tight assembly (with knurled nut)
Easy removal, easy repositioning in a system
Helium leak tested to 4X10-9 ATM.cc/sec
Maximum temperature: 242°Cc
Available factory assembly for many HAM-LET Valves: Ball Valve, Needle Valve, Diaphragm Valve, Filter, Check Valve
All metal parts are 316 Stainless Steel, O-ring - Fluorocarbon FKM.
Soft seat (PEEK) Non-rotating stem
MAWP 3000 Psi (206 Bar)
Temperature working range -20°C to 122°C (-4°F to 252°F)
Rupture disc pressure ratings: 1900 Psi (131 Bar), 285 (196 Bar)
Handle design prevents contaminants from entering into valve's critical, functional parts
Orifice size: 5.6 mm (0.218 inch)
Flow Coefficient (Cv): 0.53
Comply with TPED (2010/35/EU) as standard
Working pressure rating: up to 3,000 psig (206 bar).
Interchangeable and intermixable with major Instrumentation
Quick Connectors available in the market.
Fluorocarbon FKM O-Rings as standard, O-rings with other materials are available.
Smooth and safe connection between the QC-LOK® Connector valves is reached by a simple pushing operation due to a smart heavy-duty locking mechanism.
The QC-LOK® Instrumentation Quick Connectors validation tests are based on ANSI/B93.51M–1980
Fugitive Emission Free Valve
Encapsulated Cylindrical Stem design
On/off-service, one-piece Cylindrical Valve with
2-way pattern Stainless Steel construction
Allows bi-directional flow in 2-way straight pattern
One-piece Cylindrical Stem ensures alignment of stem and orifice
Max working pressure 2500 psi (206 bar)
Max working temperature 140ºF (60ºC)
Variety of end connection and sizes available
Variable end connection types and sizes from 1/4” to 1/2” (6mm to 12mm)
On/Off-service ball valve with 2-way pattern
Diverter, selector and on/off-service ball valve with 3-way pattern
MAWP* 10,000 psi (689 bar) with PEEK seats MAWT* 446ºF (230ºC) with PEEK seats
Operation with colored Nylon handles, metal handle, color anodized aluminum ISLT** (locking device) handles
Easy panel mounting
Electric and pneumatic actuators available
On/Off and Metering service
• PFA Encapsulated Ball Stem design
• Panel Mounting as standard
• MAWP 2000 psi (137 Barg)
• MAWT 300°F (150°C)
• End Connections: LET-LOK 1/16”, 1/8”, 1/4”, 3/8”;
• FNPT 1/8”; MNPT 1/8”; Male Face Seal 1/4”
• 1°,3° and 5° Stem Taper for required flow control
• Stem with Stopper shoulder for long life service a description about this item