Pressure

 Sizes available:  316 Stainless Steel 

2"   thru 12" with 1/8" Thickness 

8"   thru 20" with 1/4" Thickness

16" thru 24" with 3/8" Thickness

▪CMTRS – Certified Mill Test Reports Available

▪Manufactured to exceed all AGA and API requirements.

▪Universally rated for ANSI 150 to 2500 orifice fittings

Seal Rings  Sizes available: 

HNBR material  2" thru 20" 

Teflon material 2" thru 12" 

FKM material     2" thru 20" 

Nitrile material 2" thru 24"

* HNBR , FKM & Nitrile seal rings are also available in 14.3 New Style 

Available Sizes: 

316 SS Flange Type

2" thru 16" Sch40 & Sch80

316 SS Pin Type

2"  thru 4" Sch40 & Sch80

316 SS Long Pin Type

2" thru 4" Sch40 & Sch80

 Features:  Sizes range from 1/16” to 2” | 2 MM THROUGH 50 MM

Ham-let tube fitting is a mechanism used both to seal and to grip tubing. The mechanical advantage and geometry of this kind of fitting produces a leak-tight assembly .

 Ham-let tube fittings have been carefully manufactured to withstand the persistent demands for high-performance fluid system. 

Features:  Sizes range from 1/16” to 2” 

Fittings are properly packaged with the exposed threads protected to ensure they are not damaged during delivery

All pipe threads meet the requirements of ASME/ANSI B1.20.1 (1983) for tapered pipe threads (NPT)

Working pressures are calculated in accordance with Power Piping Code ANSI B 31.1, Refiner Piping Code ASME/ANSI B 31.3 and section VIII of ASME Boiler & Pressure Vessel Code

 Features:  Sizes range from  1/4” to 1”  

The HAM-LET ‘’UH’’ Series is designed for ultra-vacuum systems. Following are some of its special features:

Finger-tight assembly (with knurled nut)

Easy removal, easy repositioning in a system

Helium leak tested to 4X10-9 ATM.cc/sec

Maximum temperature: 242°Cc

Available factory assembly for many HAM-LET Valves: Ball Valve, Needle Valve, Diaphragm Valve, Filter, Check Valve

All metal parts are 316 Stainless Steel, O-ring - Fluorocarbon FKM.

METAL HOSES

PTFE HOSES

RUBBER HOSES

NYLON HOSES

PFA HOSES

 FFEATURES:

Soft seat (PEEK) Non-rotating stem

MAWP 3000 Psi (206 Bar)

Temperature working range -20°C to 122°C (-4°F to 252°F)

Rupture disc pressure ratings: 1900 Psi (131 Bar), 285 (196 Bar)

Handle design prevents contaminants from entering into valve's critical, functional parts

Orifice size: 5.6 mm (0.218 inch)

Flow Coefficient (Cv): 0.53

Comply with TPED (2010/35/EU) as standard

FEATURES

Working pressure rating: up to 3,000 psig (206 bar).

Interchangeable and intermixable with major Instrumentation

Quick Connectors available in the market. 

Fluorocarbon FKM O-Rings as standard, O-rings with other materials are available. 

Smooth and safe connection between the QC-LOK® Connector valves is reached by a simple pushing operation due to a smart heavy-duty locking mechanism. 

The QC-LOK® Instrumentation Quick Connectors validation tests are based on ANSI/B93.51M–1980 

FEATURES 

Fugitive Emission Free Valve 

Encapsulated Cylindrical Stem design 

On/off-service, one-piece Cylindrical Valve with 

2-way pattern Stainless Steel construction

Allows bi-directional flow in 2-way straight pattern

One-piece Cylindrical Stem ensures alignment of stem and orifice 

Max working pressure 2500 psi (206 bar) 

Max working temperature 140ºF (60ºC) 

Variety of end connection and sizes available 

 Variable end connection types and sizes from 1/4” to 1/2” (6mm to 12mm) 

TBV FEATURES 

On/Off-service ball valve with 2-way pattern 

Diverter, selector and on/off-service ball valve with 3-way pattern 

MAWP* 10,000 psi (689 bar) with PEEK seats MAWT* 446ºF (230ºC) with PEEK seats

Operation with colored Nylon handles, metal handle, color anodized aluminum ISLT** (locking device) handles

Low-operating torque 

Easy panel mounting 

Electric and pneumatic actuators available

FEATURES 

On/Off and Metering service

• PFA Encapsulated Ball Stem design

• Panel Mounting as standard

• MAWP 2000 psi (137 Barg)

• MAWT 300°F (150°C)

• End Connections: LET-LOK 1/16”, 1/8”, 1/4”, 3/8”;

• FNPT 1/8”; MNPT 1/8”; Male Face Seal 1/4”

• 1°,3° and 5° Stem Taper for required flow control

• Stem with Stopper shoulder for long life service a description about this item

 Electronic Gauge Pressure, Gauge Pressure, Pressure Measurement

Description - The 3051 Series SMART Transmitters are offered in a variety of configurations for differential, gauge, liquid-level, flow and specific gravity measurement applications.

Description - The 3051S Series SMART  Pressure Transmitters are offered in a variety of configurations for differential, gauge, liquid-level, flow and specific gravity measurement applications

Typical Application:
3051S_CA: Absolute Pressure
3051S_CD: Differential Pressure for flow or level measurement
3051S_CG: Gauge Pressure
3051SAL: Flanged-mounted Liquid Level for open- or closed-tank application
3051S_TA: Direct Mount Absolute Pressure
3051S_TG: Direct Mount Gauge Pressure 

Description - The 3051 Series SMART Transmitters are offered in a variety of configurations for differential, gauge, liquid-level, flow and specific gravity measurement applications. 

Differential Pressure, Electronic Differential Pressure, Pressure Measurement

 Description - The 1151 Alphaline Pressure Transmitters are offered in a variety of configurations for differential, gauge, absolute, liquid-level, flow and specific gravity measurement applications. 

Absolute Pressure, Electronic Absolute Pressure, Pressure Measurement

Description - The 1151 Alphaline Pressure Transmitters are offered in a variety of configurations for differential, gauge, absolute, liquid-level, flow and specific gravity measurement applications. 

 The 3144P SMART  Temperature Transmitters accept a user-selectable RTD, thermocouple, millivolt, or ohm input and transmit a proportional digital HART-based electrical signal. 

Complete Transmitter assembly | Thermowell | RTD's

Description - The 3144D SMART Temperature Transmitters accept a user-selectable RTD, thermocouple, millivolt, or ohm input and transmit a proportional digital HART-based electrical signal.

TECHNICAL SPECIFICATIONS

• Pressure ranges from 1.6 kPa abs up to 10000 kPa abs (0.23206 to 1450.38 psi abs) 

• Accuracy: ±0.2% (option: ±0.1%)

• Stability: ±0.2% of URL for 10 years

• Output: 4-20 mA / HART or Foundation Fieldbus

• Programmable output linearization in up to 14 points

• Burnout current functionality compliant with NAMUR NE43

• Dry calibration without reference pressure

TECHNICAL SPECIFICATIONS

 • Pressure ranges from 0.32 kPa up to 50000 kPa (0.04641 to 7251.89 psi)

• Accuracy: ±0.065% for differential and gauge pressure models and ±0.2% for absolute pressure models

• Stability: ±0.2% of URL for 10 years

• Output: 4-20 mA / HART or Foundation Fieldbus

• Programmable output linearization in up to 14 points

• Burnout current functionality compliant with NAMUR NE43

• Dry calibration without reference pressure

TECHNICAL SPECIFICATIONS 

•Pressure ranges from 0.1 kPa up to 20000 kPa (0.0145 to 2900.75 psi)

•Accuracy: ±0.065% (option: ±0.04%)

•Stability: ±0.1% of URL for 10 years

•Output: 4-20 mA (linear or square root) / HART or Foundation Fieldbus

•Programmable output linearization in up to 14 points

•Burnout current functionality compliant with NAMUR NE43

•Low flow cut-off

•Dry calibration without reference pressure

TECHNICAL SPECIFICATIONS

• Pressure ranges from 10 mmH2O up to 300000 mmH2O (0.3937 to 11811 inH2O)

• Accuracy: ±0.165% (option: ±0,1%)

• Stability: ±0.2% of URL for 10 years

• Output: 4-20 mA / HART or Foundation Fieldbus

• Programmable output linearization in up to 14 points

• Burnout current functionality compliant with NAMUR NE43

• Dry calibration without reference pressure

  TECHNICAL SPECIFICATIONS 

  • Pressure ranges from 1.3 kPa up to 50000 kPa (0.18855 to 7251,89 psi)

• Accuracy: ±0.065% (option: ±0.04%)

• Stability: ±0.1% of URL for 10 years

• Output: 4-20 mA / HART or Foundation Fieldbus

• Programmable output linearization in up to 14 points

• Burnout current functionality compliant with NAMUR NE43

• Dry calibration without reference pressure

TECHNICAL SPECIFICATIONS  

  •Pressure ranges from 8.125 kPa abs up to 3000 kPa abs (1.1784 to 435.11 psi abs)

•Accuracy: ±0.2%

•Stability: ±0.2% of URL for 10 years

•Output: 4-20 mA / HART or Foundation Fieldbus

•Programmable output linearization in up to 14 points

•Burnout current functionality compliant with NAMUR NE43

•Dry calibration without reference pressure

TECHNICAL SPECIFICATIONS

•Pressure ranges from 8.125 kPa up to 10000 kPa (1.1784 to 1450.38 psi)

•Accuracy: ±0.1%

•Stability: ±0.2% of URL for 10 years

•Output: 4-20 mA / HART or Foundation Fieldbus

•Programmable output linearization in up to 14 points

•Burnout current functionality compliant with NAMUR NE43

•Dry calibration without reference pressure

TECHNICAL SPECIFICATIONS 

•Pressure ranges from 8.125 kPa up to 10000 kPa (1.1784 to 1450.38 psi)

•Accuracy: ±0.1% for FKP and ±0.2% for FKH

•Stability: ±0.2% of URL for 10 years

•Output: 4-20 mA / HART or Foundation Fieldbus

•Programmable output linearization in up to 14 points

•Burnout current functionality compliant with NAMUR NE43

•Dry calibration without reference pressure